LDS-1A is a low-cost leak detection solution for small areas such as computer rooms, laboratories, base stations, museums, etc. It has the characteristics of fast real-time response, high cost-effectiveness, and easy installation.
(1)Provide 4-channel detection cable interfaces, which can be connected to 4-channel 2-core water leakage detection cables.
(2)It has water leakage and wire breakage detection functions to prevent the loss of water leakage detection function after the detection cable is damaged.
(3)The detection sensitivity can be set to adapt to leakage detection of different water quality.
(4)Real time response is fast, with a response time of less than 3 seconds, which can be set by the user.
(5)Provide RS485 bus interface and adopt MODBUS protocol for easy access to third-party remote monitoring systems.
(6)The monitoring range is wide, and the maximum detection distance can reach 100m.
(7)It has 1 relay output, used for outputting alarm signals or as a leakage control signal.
(8)Provide alarm sound output and can be set to turn on or off the alarm sound.
(9)Equipped with 4 LED status indicators, it can quickly and intuitively understand the working status of the leakage detection system.
(10)MTBF greater than 10 years, estimated based on BELL CORE 2.0.
(11) The port has EMC design, strong anti-interference ability, and high long-term stability.